Home / Engineering Tools

Engineering Tools

Online calculators, selectors and configurators for the design and procurement stage. Results are for preliminary sizing only; final selection must be confirmed against manufacturer data and the applicable standards. Contact us for help.

MS1000 Linear Heat Detection Selector
Select the MS1000 linear heat cable, interface and end unit with UL, FM and Ex compliance checks and a 3D simulation.
Sanjiang Fire Alarm and Extinguishing Panel Selector
Choose a Sanjiang SEC1000, SEC3002 or ECP1000 panel, add devices, simulate a fire and gas release in 3D.
Cla-Val Fire Protection Valve Selector
Select Cla-Val fire protection valves: 50B-4KG1 and 55L-60 pump relief, 90-21 and 90-FPX pressure reducing and Series 34 air release, with 3D animation.
FK-5-1-12 Gaseous Extinguishing Selector
Size an FK-5-1-12 total flooding system to NFPA 2001: agent mass, cylinders, nozzles, bill of quantities and a 3D discharge simulation.
Aircraft Hangar Fire Extinguishing
Interactive 3D fire demo for aircraft hangar foam suppression systems (Groups I to IV).
Foam Skid Configurator
Foam skid configurator for foam fire suppression systems: select and size your system.
Aspirated Foam Nozzle Calculator
Aspirated foam nozzle calculator: flow per nozzle, number of nozzles, total solution and concentrate flow for foam suppression.
F+W X Series Proportioner Selector
Flow range selector for the F+W water motor driven foam proportioner X Series: model, rate and water flow against the FM approved range.
SMH Bladder Tank and MSC-M / MAP-M Ratio Controller Selector
SMH bladder tank, MSC-M and wide range MAP-M ratio controller selector: tank and controller from flow, ratio and run time, with 3D view.
HD Fire FCA Foam Chamber Performance Calculator
HD Fire FCA foam chamber performance: flow against pressure, chambers needed for a tank and foam output (UL/FM).
Remote Monitor Configurator
Remote fire monitor configurator: flow, throw range and height from monitor, nozzle and pressure.
Pumpsense UL / FM Fire Pump Selector
Selector for UL and FM horizontal split case, two-stage and end suction fire pumps: model from flow and pressure.
2500 gpm Fire Pump Packages: Skid and Container
2500 gpm skid-mounted and containerized fire pump packages: electric, diesel and jockey pump, Tornatech controllers, layout and scope of supply.
Mercor Smoke Vent Configurator
Mercor smoke and heat exhaust vent (SHEV) configurator: type, size, glazing, control system and accessories, with 3D view and bill of materials.
Storage Sprinkler Selector: Reliable and Tyco
Storage sprinkler selector for Reliable and Tyco ESFR and standard sprinklers: suitability by ceiling and storage height, flow calculation and spray distribution.
Fire Door Selector
Asturmadi steel fire door selector: EN 1634-1 and UL 10B, 3D door, fire test animation, quote and specification export.
Fire Curtain and Smoke Barrier 3D Demo
Interactive 3D demo: fire curtain models, alarm, emergency and escape buttons, power loss, irrigation and a smoke barrier scene.
Fire Pump and Foam Yard 3D Demo
Interactive 3D flow demo of a marine fire pump and foam yard: vertical turbine and jockey pumps, foam pumps, ring main and hydrants.
Volon Valve Selector
Volon gate valves, hydrants, post indicators and roadway boxes: filter by stem, end connection, UL / FM approval and size, with dimensions and 3D models.
Lede Valve Selector
26 Lede fire protection valve models: gate, check, deluge, alarm check and pressure reducing valves, indicator posts and hydrants, with spec sheets and 3D cutaways.
Lede Grooved Fittings Selector
Lede grooved couplings, elbows, tees, reducers and end caps: filter by size, pressure, approvals and use, with 3D assembly animation.
HOOGO Seismic Brace 3D Demo
Interactive 3D assembly of a HOOGO lateral seismic sway brace on a sprinkler pipe: beam clamp, connector, brace pipe, pipe clamp and loop hanger, with a 30° to 90° angle control.
WhatsApp